plans a CEDIA Expo
launch of a wireless multi-room-audio system with more capabilities than its
Proficient president Keith
Marshall positions his new wireless system as a way for installers who are
mounting a flat-panel TV to step the customer up to a multi-room-audio system
that can be installed in one day in four to six rooms without creating a mess.
The systems could also expand the
market to renters who aren’t allowed to modify their apartments.
wireless distribution of up to six audio sources simultaneously to freestanding
stereo speakers in up to 24 rooms if three wireless transmitters are used at a
time. Each transmitter supports up to eight tabletop amplifier/receivers, and
each transmitter is capable of sending stereo audio from two separate sources
while also sending mono wirelessly to a powered subwoofer in the same room or
Zero’s predecessor, called
AirFlex, simultaneously transmitted music wirelessly from two sources to up to
four rooms when two transmitters were used.
The new system, shipping in the
fourth quarter, also extends transmitting range through walls to 90 feet from
70 feet. A wireless extender is planned for first-half 2012 availability to
further extend range.
One Zero transmitter is bundled
with an amplified receiver at a suggested $450. Additional receivers cost $250
The transmitters connect to multi-zone
A/V receivers, Internet radio streamers, and other music sources via a digital
PCM optical input and a two-channel analog stereo input.
Using a supplied IR remote
pointed at the amplifier/receivers, users can switch between the two sources
connected to a transmitter and a local source connected to the amplifier/receiver
via optical digital input or stereo 3.5mm input.
Using the amplifier/receiver’s
supplied IR remote, users can also switch among three transmitters to access
additional remote sources.
The 2×35-watt Class D
amplifier/receiver also features IR passthrough and IR output to control a
local source. That feature was unavailable on the AirFlex, which nonetheless
did come with an IR remote to switch between a remote source and a local
An unamplified receiver is in the
works for the first half to add wireless multi-room capability to stereo
systems or active speakers.
Like its predecessor, a Zero
system can also be used to send audio wirelessly to surround speakers, and a
Zero amplifier/receiver can be used alone behind a flat-screen TV to amplify TV
Also like its predecessor, Zero
systems don’t enable users to turn on or control a source connected to a
transmitter in another room.
The new HDBase-T implementation is said to include the first use
of simultaneous Audio Return Channel (ARC) and Home Ethernet Connection (HEC),
allowing audio signals to be sent back from a TV to an AV receiver while
maintaining a home internet connection over the same HDMI cable.
new products also support Power Over HDBase-T (POH) capabilities
that eliminate the need for separate power supplies at the receiver module and
provide the ability to remotely power ancillary equipment.
HDBase-T is consumer electronic connectivity technology for
long-distance transmission of uncompressed high-definition video, audio,
100BaseT Ethernet, high-power over cable and various controls, via a 100m
Cat5e/Cat6 cable with 8P8C RJ45 connectors.
The new updates to the technology are employed in the company’s
new HD-1 Improved HDMI extender and will be selectively applied to the new QX-4
Matrix Switcher, which offers 4-by-4 (expandable to 8-by-8) matrix
“These new products are in keeping with the company’s philosophy
of providing custom installers with a
targeted number of multi-purpose products rather than dozens of limited
capability devices,” Transformative Engineering said in a statement announcing
the products Tuesday. “Wherever possible, T-E provides installers with a clear
and economical upgrade path that can grow to meet the evolving needs of end
The HD-1 Improved Extender is among the first HDBase-T products that
fully utilize all of the current 5-Play protocols, including: full uncompressed
HD (1080p) video, audio (including all current Digital Surround formats),
100BaseT over Ethernet, Power over Cable, and various control signals over a
single 100 Meter LAN cable.
This results in a fully-compliant HDMI 1.4a product
(Certification Pending). Improved
features from the previous generation include Power Over HDBase-T, used to
power ancillary equipment; simultaneous HEC & ARC transmission; and
Power-On-Demand, greatly reducing power usage and heat generation.
has also introduced the QX-4 HDBase-T Matrix Switcher with HDMI 1.4a-compliant
circuitry. The product performs as a
4-by-4 Matrix switcher with both local (HDMI) and long-run, 100 Meter
TE said it designed the unit to be configurable and upgradable to
an 8-by-8 Matrix Switcher.
The Matrix Switchers include Power-Over-HDBase-T (meaning the
receiver end is powered by the Transmitter), IR Two-Way Communication, Ethernet
over Base-T, and Power-On-Demand Circuitry.
In addition, a provision for overall IR remote control (with
Discrete commands), and RS232 interface are included.
The HD-1 Improved will be available in the end of September and will
be sold concurrently with the standard HD-1.