CEDIA Expo
Indianapolis – Pixel Technologies is at CEDIA Expo to
show its QuadraBOOST Pro, a dual-band professional cellular signal boosting
kit.
The Pro boosts the 850 MHz and
1,900 MHz bands using two high-gain outdoor panel antennas, one for each band,
that be independently aligned to separate towers to maximize signal strength
over an area of up to 20,000 square feet.
The output of the antennas is
combined with a diplexer on a single standard RG-6 lead-in cable to a 60dB
indoor bi-directional amplifier. The amplifier’s gain can be reduced to
optimize performance for installations where it is not practical to separate
antennas sufficiently to prevent feedback problems, the company said.
It includes two interior antennas
for multi-zone coverage: an indoor high-gain, 8 dBi/12 dBi dual-band
directional antenna panel that can be flush-mounted to a wall or ceiling or
supported by a supplied azimuth/elevation alignment bracket, and a secondary
indoor 5 dBi dual-band indoor omni-directional antenna.
The kit also includes mounting
hardware required for installation to a pole (up to 2 inches in diameter) or
flat surface; grounding hardware to meet local electrical codes; a
high-band/low-band antenna diplexer; a 3/6/10 dB in-line attenuator kit; wideband
two-way signal splitter; and Coaxseal connector weather proofing.
Retail pricing for the kit will
be announced.
Pixel Technologies is in booth
837.
