Draper Intros Flat-Panel Mounting Solutions
By Lisa Johnston -- TWICE, 6/18/2007
SPICELAND, IND. — Draper recently introduced several mounting solutions for flat-panel displays up to 37 inches and weighing up to 66 pounds.
The SMS WM T ($108 suggested retail) features aluminum construction, and places the back of display 1.5 inches away from the wall. It can be mounted to single wall stud/support, and displays can be tilted up to 15 degrees.
The steel SMS WM T2 ($73) also puts the back of display is only 1.5 inches from the wall, and allows the display to be tilted up to 10 degrees. The WM T2 mounts to two wall studs/supports spaced at 16 inches on center.
The SMS WM ST ($133) brings the display within 3.25 inches of the wall. It also features up to 12 degrees of tilt and approximately 20 degrees of rotation from side to side.
The SMS CM ST400/800/1200/1800 ceiling mount series is available in four sizes, and can hold up to four total displays depending on display sizes and length of mount. Displays can be placed back to back, tilted up to 12 degrees and rotated up to 15 degrees side to side. Each CM ST ceiling mount includes a kit for mounting one display. Additional kits are required for each additional display. Suggested retails range from $373 to $780, depending on size.
